Rhinestone Car Decal Instructions

You will need a lint free cloth and a spray bottle with soapy water.

1.        Clean your surface with soapy water (preferably dish soap or baby shampoo).  You will only need a very small amount of soap added to your water (less is best).

2.       Once you have a clean window detach your decal from its backing.  Lightly spray the back of your decal with the soapy water.  Place your decal on your cleaned surface.  The soapy water on the back of your decal will make it easier to position your decal.  *Please note that these decals are a onetime use only.  When removing from backing be careful not to stretch the clear adhesive material.  The decal will be extremely sticky so be sure not to let it fold over on its self. Once placed they will not be able to be removed without damaging the decal. 

3.       Use your lint free cloth to gently pat down your decal removing any air bubbles.  Allow the decal to dry for 1 hour before touching.  This will allow the decal to adhere properly and dry any remaining water under the decal

Do not use any brushes when washing directly on your decal.   A touch free car wash is highly recommended.  When it comes time to remove your decal pick a corner and pull slowly.  The clear adhesive material will remove easily but take note the rhinestones will begin to pop off.

Wall Graphic Instructions

Apply to clean dry surface, remove any dust or dirt before application.  This item is meant for indoor use only.

1.       Carefully remove graphic from paper liner.  Avoid adhesive to adhesive contact; if this occurs gently pull apart.

2.       Apply to your wall smoothing out any air bubbles by hand during application.

3.       Save the paper liner for future use.  To transfer to another location, place the wall graphic back on the glossy side paper liner to protect from debris or sticking to other objects.

Baseball/Softball Rhinestone Car Decal
$15.00 $10.00

Custom iPhone 4 Case
$18.00

Love Rhinestone Car Decal
$18.00